Aries AeroTread Running Boards Installation - 2016 Honda Pilot- Video
Speaker 1: Today, on this 2016 Honda Pilot, we'll be having a look at and showing you how to install the Aries AeroTread Running Boards with Custom Installation Kit. Part number AA2051029. Here's what our running boards look like installed. Now, the reason you're going to want a set of running boards for your vehicle is not only do they add a stylish look to it, but they also make it a lot easier for you to get in and out of it as well.These run the full length of your passenger compartment, so it makes it easy for your back seat passengers to get in too. We have this nice plastic step surface, which is 5" deep from the very back of it to the very front of it, which makes a wide path for your foot to make contact with. So you don't have to worry about slipping and falling as you're getting in and out of the vehicle. more
9/17/2018 10:32:19 AM
DeeZee NXc Running Boards Installation - 2017 Honda CR-V- Video
Speaker 1: Today on our 2017 Honda CRV, we're going to be installing the Dee Zee NXC running boards with custom installation kit, with the black and chrome trim package. Part number DZ16202-16233. These are also available in stainless steel finish with part number DZ16203-16233, and an all black finish with DZ16201-16233. The number one functional benefit of these running boards, is making it easier to get in and out of your vehicle. You go to step, so you don't have strain getting in or out.This is going to be useful kids getting in and out the back, so they don't have to pull themselves in. It'll also be useful for anybody else that needs that extra step to get in. more
6/5/2018 9:37:13 AM
Westin Tube Step Installation - 2013 Honda CR-V- Video
Today on our 2013 Honda CR-V, well install the Westin Tube Steps, Part Number 23-3780. To begin our install, we can go ahead and point out two of the three attachment points for our forward and rear brackets.To identify our brackets, once removed in the package, we can locate the stamped letters for DF drivers front, and DR for drivers rear on the brackets. For each of our attachment points, both securing the brackets to the vehicle and the tube step to the bracket, well be using the new 10 millimeter volts, split lock washer and flat washer on each attachment point.Using the template provided in the instructions, well cut out access holes to feed the brackets to the under body panels where well be securing the inner attachment point for both the front and rear brackets.With our template already cutout, a quick tech tip, will be to use the 100 millimeter bolt and flat washer to assist in hold the template into position while we use a paint marker to trace out the cutout areas. Now with both traced out, well go ahead and completely remove the underbody panel.To remove the underbody panel, there are multiple fasteners. Once we remove the pushpin and bolt fasteners, we can go ahead and remove the under body panel. Were going to set it in a secured location or we can use a utility knife to cut out the marked areas.Now, with our cut outs made, well leave the under body panel aside and go ahead and install the outer two fasteners for both the front and rear brackets. more
6/20/2013 10:18:50 AM
Filter Videos
Filter Videos
